bh-340 spacer packed separately 0.660 [16.8mm] 0.100 [2.5mm] ?.135 [?3.4mm] 0.550 [14.0mm] 0.400 [10.2mm] 0.250 [6.3mm] 0.100 [2.5mm] 0.170 [4.3mm] 0.100 [2.5mm] 0.250 [6.4mm] 0.075 [1.9mm] holder face typ. 0.475 [12.1mm] 0.400 [10.2mm] 0.325 [8.3mm] 0.170 [4.3mm] 0.250 [6.4mm] 0.555 [14.1mm] recommended mounting holes 0.150 [3.8mm] 0.225 [5.7mm] ?.032 +.003 -.002 typ. standard tolerance a 1. general specifications: bivar molded component specification bv00-e101. cage code : 32559 part no: title: cad generated document, do not measure drawing. quad level t-1 (3mm) led holder two-piece decimals .x .1 .xx .01 .xxx .005 shane irving m. chen ( unless otherwise specified ) designed: checked: angular date: date: x 1 06/24/02 06/25/02 4 thomas, irvine, ca. 92618 tel: (949) 951-8808 fax: (949) 951-3974 sheet # of H-455C revision: 1 1 d engineering update w/o changes b rev. description 02/27/04 date m. c. approved 2. material: nylon 6/6, 94v-0, black. bivar material code 22-bk. rtp polyamide nylon 6/6, 0200 fr, black or modified plastics mn6/6-se bk. changed section view from left holes to right holes. changed bottom holes from .030 sq. to .020x.030. c m. c. 01/20/05 removed bh-340 dimensions d 08/16/07 m. c.
|